Advantech TS-206 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 100

background image

iii

TS-206 User Manual

Copyright

The documentation and the software included with this product are copyrighted 2021

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. The information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties that may result from its use.

Acknowledgments

Intel and Pentium are trademarks of Intel

®

Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft

®

Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.
Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate

-

rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.

1.

Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages displayed when the prob

-

lem occurs.

2.

Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3.

If your product is diagnosed as defective, obtain a return merchandise authori

-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4.

Carefully pack the defective product, a completed Repair and Replacement

Order Card, and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur

-

chase date are not eligible for warranty service.

5.

Write the RMA number clearly on the outside of the package and ship the pack

-

age prepaid to your dealer.

Part No. 2006020600

Edition 1
May 2021

«
1
2
3
4
5
...
»

Содержание TS-206





































































































Отзывы:

Нет отзывов

Похожие инструкции для TS-206

Бренд: GDC Страницы: 64

Бренд: X-pole Страницы: 16

Бренд: Dacor Страницы: 4

Бренд: IDEAL Страницы: 6

Бренд: IdeaFly Страницы: 3

Бренд: iDataLink Страницы: 106

Бренд: Yealink Страницы: 2

Бренд: Waldbeck Страницы: 7

Aerasgard KCO2-W

Бренд: S+S Regeltechnik Страницы: 16

ETIQUETTE MEMOIRE M I740N

Бренд: Aastra Страницы: 1

Dual Shock Rally Master

Бренд: Trust Страницы: 9

Easyrack 6622520 01 01

Бренд: hepco & becker Страницы: 4

Alpha Top Easy-Flue 500 mm

Бренд: Alpha Страницы: 6

Бренд: Bioenno Power Страницы: 2

Бренд: Lafferty Страницы: 4

Бренд: A&D Страницы: 68

Бренд: Chevrolet Страницы: 2

Бренд: Navitel Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды