Advantech SOM-2532 Series, Руководство пользователя

Страница: 72 / 104

SOM-2532 User Manual 62
grayed out, check the above options. The same pin cannot be assigned to
multiple IP. I2S1 does not have conflict
– UART0
If UART0 is disabled, UART1-5 will be disabled too due to sharing same
function
– HSUART0/RS485
Select this to enable UART to support HSUART/RS485. Each HSUART pin
conflict dependency is similar to UART
– UART1
To assign this device to host owned, you must enable PSE UART0 to host
owned because UART0 is the function0 of this device. UART0 has no pin
conflict. UART1 has pin conflict with TGPIO. UART2 is default enabled for
PSE logging purpose. UART3 has conflict with GBE0-1, PWM and TGPIO.
– HSUART1/RS485
Select this to enable UART to support HSUART/RS485. Each HSUART pin
conflict dependency is similar to UART
Figure 3.44 PSE Controller
UART2
To assign this device to host owned, you must enable PSE UART0 to host
owned because UART0 is the function0 of this device. UART0 has no pin con -
flict. UART1 has pin conflict with TGPIO. UART2 is default enabled for PSE log -
ging purpose. UART3 has conflict with GBE0-1, PWM and TGPIO.
HSUART2/RS485
Select this to enable UART to support HSUART/RS485. Each HSUART pin con -
flict dependency is similar to UART
UART3
UART3 has pin conflict with GBE0-1, PWM and TGPIO, and serialio controller. If
it is grayed out, check the above options. The same pin cannot be assigned to
multiple IP.