SKY-8232D Manual V02 20220411 Copyright 2022 Advantech Co. Ltd. All rights reserved
Page 92
3.3 Installing Components
Caution!
Please make sure you follow the safety guidelines presented in
when making changes to the hardware.
Except for installing rear 2
.5” disk drives, all component installation described
in this section require power to the unit to be shut down and removed.
3.3.1 Removing the Top Cover
Note!
You need:
-
A PH2 screwdriver
The top cover is secured by two M3 screws at the side and hood latch at the top. To
remove the top cover, loosen the screws at the side with screwdriver. After that, unlock
the hood latch by screwdriver and press the button which will let the handle pop up.
Pull the handle all the way up to allow the top cover slide backwards until the front
flange of the top cover disengages with the unit
’s face plate, and then lift off and
remove the top cover.
Hood latch
Figure 3-29: Slide Top Cover Back
M3 screws
M3 screws
Handle
Button
Содержание SKY-8232D
Страница 113: ...SKY 8232D Manual V02 20220411 Copyright 2022 Advantech Co Ltd All rights reserved Page 113 Appendix B BIOS POST Code ...
Страница 128: ...SKY 8232D Manual V02 20220411 Copyright 2022 Advantech Co Ltd All rights reserved Page 128 Appendix E Warranty and RMA ...
Страница 130: ...SKY 8232D Manual V02 20220411 Copyright 2022 Advantech Co Ltd All rights reserved Page 130 Appendix F Glossary ...