RSB-3720 User Manual
44
3.13.3
MIPI-CSI0 (Tested with Basler daA3840-30mc Camera)
Step 1: Connect the Basler camera to the mini-SAS. Then connect this to the MIPI-
CSI Cable. Then connect the mini-SAS cable to the ROM-EG55 board. Finally, con
-
nect the other side to the Basler daA3840-30mc Camera.
Step 2: Connect the ROM-EG56 (DSI to HDMI Converter board).
Step 3: Press enter after boot, system will stop at the u-boot demonstrated below:
3.13.3.1
Preview
3.13.3.2
Capture
Normal Boot
Hit any key to stop autoboot: 0
u-boot=>
u-boot=> setenv fdt_file imx8mp-rsb3720-a1-basler.dtb; boot
# gst-launch-1.0 -v v4l2src device=/dev/video0 ! "video/x-raw,for
-
mat=YUY2,width=1920,height=1080" ! queue ! imxvideoconvert_g2d ! waylandsink
# gst-launch-1.0 v4l2src num-buffers=1 device=/dev/video0 ! video/x-
raw,width=1920,height=1080 ! jpegenc ! filesink location=sample.jpeg
Содержание RSB-3720
