background image

43

ROM-5420 User Manual

Chapter 5

A

dvantech

Services

Integration stage

This phase comprises HW/SW integration, application development, and peripheral
module implementation. Due to the lack of knowledge and experience on platforms,
customers need to spend a certain amount of time on analyzing integration problems.
In addition, peripheral module implementation has a lot to do with driver designs on
carrier boards, RISC platforms usually have less support for ready-made drivers on
the carrier board, therefore the customer has to learn from trial and error and finally
get the best solution with the least effort. Advantech’s team has years of experience
in customer support and HW/SW development knowledge. Consequently, we can
support customers with professional advice and information as well as shortening
development time and enabling more effective product integration.

Validation stage

After customer’s ES sample is completed, the next step is a series of verification
steps. In addition to verifying a product’s functionality, the related test of the product’s
efficiency is also an important part at this stage especially for RISC platforms.
As a supportive role, Advantech primarily helps customers solve their problems in the
testing process and will give suggestions and tips as well. Through an efficient verifi-
cation process backed by our technical support, customers are able to optimize their
applications with less fuss. Furthermore, Advantech’s team can provide professional
consulting services about further testing and equipment usage, so customers can
find the right tools to efficiently identify and solve problems to further enhance their
products quality and performance.

5.2

Contact Information

Below is the contact information for Advantech customer service

You can also reach our service team through the website below; our technical sup-
port engineer will provide quick response once the form is filled out:
http://www.advantech.com.tw/contact/default.aspx?page=contact_form2&sub-
ject=TeSupport

Region/Country

Contact Information

America

1-888-576-9688

Brazil

0800-770-5355

Mexico

01-800-467-2415

Europe (Toll Free)

00800-2426-8080

Singapore & SAP

65-64421000

Malaysia

1800-88-1809

Australia (Toll Free)

1300-308-531

China (Toll Free)

800-810-0345
800-810-8389
[email protected]

India (Toll Free)

1-800-425-5071

Japan (Toll Free)

0800-500-1055

Korea (Toll Free)

080-363-9494
080-363-9495

Taiwan (Toll Free)

0800-777-111

Russia (Toll Free)

8-800-555-01-50

Содержание ROM-5420























































Отзывы: