Advantech RISC Module SOM-A2552 Скачать руководство пользователя страница 32

Страница: 32 / 40

Your ePlatform Partner

User’s Manual for Advantech SOM-A2552 series module V1.00

B50 MBGNT

Memory Controller grant. Notifies an
external device that it has been
granted the system bus. If user
wants to design a controller in CSB
with this pin function, please check
with

[email protected]

first.

If use doesn’t want to use this pin as
MBGNT, use could use the pin as
GPIO. The pin connects to SoC
PXA255 GPIO13.

Pull low

with 1Kohm

A50 3M6864

3.6864 MHz clock. Output from
3.6864 MHz oscillator.

No pulling

100-pin B2B connector Pin Out Table (X3 connector for PCI, ZV port,

MMC interface and Misc. function)

Pin
No.

Signals

Typ

Model

Default state

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

N.C.

- N.C. just float this pin.

B10

GND

P Ground

A10

N.C.

- N.C. just float this pin.

B11

N.C.

- N.C. just float this pin.

A11

N.C.

- N.C. just float this pin.

B12

N.C.

- N.C. just float this pin.

A12

N.C.

- N.C. just float this pin.

B13

N.C.

- N.C. just float this pin.

A13

N.C.

- N.C. just float this pin.

B14

N.C.

- N.C. just float this pin.

A14

GND

P Ground

B15

N.C.

- N.C. just float this pin.

Содержание RISC Module SOM-A2552









































Результаты поиска

Содержание RISC Module SOM-A2552

Отзывы:

Advantech RISC Module SOM-A2552, Руководство пользователя, Страница: 32 / 40

Результаты поиска

Содержание RISC Module SOM-A2552

Отзывы: