PPC-415 Startup Manual 3
Mount Installation
To mount the flat-bezel panel PC, follow the steps outlined below.
1. Prepare a panel cutout based on the dimensions of the panel PC.
(PPC-415 cutout dimensions: 382 x 303 mm/15.04 x 11.93 in)
2. Install the panel PC in the cutout. Retrieve the 10 hook brackets and M6 x 21L screws from the accessory box.
3.
Insert the hook brackets into the holes as shown in the figure above. Then move the hook brackets in the direction of the
arrow shown in the figure below to lock them in place. Hang the panel PC from the hook brackets.
4.
Tighten the screws to affix the panel PC in place.
