PPC-315W/321W-TGL User Manual
20
2.3.3
Arm Mounting
PPC-315W/321W TGL can be mounted on a VESA-compliant arm mount with a 100
mm (3.93 in) interface pad. To affix the panel PC to an arm mount, follow the steps
below.
1.
Refer to the installation instruction of the mounting arm to correctly mount the
arm onto the surface as a base.
2.
Align the retention screw holes on the mounting arm interface with VESA holes
in the panel PC, and secure the panel PC with the four M4 retention screws.
Figure 2.26 Arm Mount for Panel PC
2.3.4
Stand Mounting
Before stand mounting, check that the product was shipped with the following items:
Warning!
Ensure that the thread depth of the screws on the rear panel does not
exceed 4 mm (0.15 in).
Содержание PPC-315W TGL
