Advantech PPC-3100S, Руководство пользователя

Страница: 64 / 68

PPC-3100S/3120S/3150S/3210SW User Manual 54
C.1 E-Eye Function
Table C.1: E-Eye Monitoring Function List
Item Function
Failure
Code Error
Description
Checking/Repair Suggestion
1 Main board E0
Main board start-
up error
1. Check the power input
2. Check that no cable or system short
circuits have occurred
3. Send the main board for repair
2 Memory E1 Memory error
1. Check the memory type is correct
and verify installation
2. Check the memory slot function
3. Send the main board for repair
3 Touchscreen E2
Touchscreen con-
troller error
1. Check that touch function is enabled
for the operating system
2. Check that the touch controller type
is correct via the Device Manager
3. Send the main board for repair
4 LVDS E3
LVDS transfer
controller error
1. Check the display settings of the
operating system
2. Send the main board for repair
5 USB E4
USB internal
detecting error
1. Check USB function by testing the
USB device in another system
2. Send the main board for repair
6 Serial port E5
Serial port inter-
nal loopback error
1. Check serial port function using an
external device
2. Send the main board for repair
7 LAN port E6
LAN port control-
ler error
1. Check LAN port function to verify
LAN connection
2. Send the main board for repair
9
SATA stor-
age device
E8
SATA storage
connection error
1. Check that the SATA/mSATA device
is connected
2. Check SATA that the cable or
mSATA device is secure
3. Check SATA/mSATA device function
4. Send the main board for repair
Note! E-Eye should show “FF” after a successful startup and self-diagnosis
test.
If E-Eye shows E0 ~ E8 codes, there are one or more errors.
Failure codes outside of E0 ~ E8 suggest the error may be caused by
other drivers or software.
If certain functions are showing problems but E-Eye shows “FF”, this
may be due to limitations in the self-diagnosis function.