manualshive.com logo in svg

Advantech PPC-154, Руководство пользователя

Поделиться
Скачать
Advantech PPC-154 Скачать руководство пользователя страница 14

PPC-154 User’s Manual

2

Chapter 1  General Information

1.1  Introduction

Advantech PPC-154T is an Intel Pentium 4 processor–based Panel PC 
with 15” LCD display. The powerful Pentium 4 CPU and Intel 845GV 
chipset with a 15” LCD display brings the most dynamic applications to 
life without sacrifices to any industrial reliability. 

PPC-154T is equipped with an onboard Intel Pentium 4 CPU up to 3.06 
GHz (HT Technology support), memory up to 2 GB DDR SDRAM, the 
Intel 845GV chipset, and an onboard PCI Ethernet controller. Multimedia 
devices, connectors, and one PCI socket is available for expansion. There 
are multi-COM port interfaces and five main extensions: a built-in CD-
ROM drive, CompactFlash socket, FDD, two PCMCIA Type II slots and 
four USB 2.0 ports.

An optional 6-in-1-card reader is available for built in SSD support. Its 
perfect for applications ranging from factory automation systems to Point 
of Information (POI) and Interactive kiosks.

    

Содержание PPC-154







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды