Advantech PPC-150 Series Скачать руководство пользователя страница 132

Страница: 132 / 194

Chapter 9

Award BIOS Setup

115

PIO means Programmed Input/Output. Rather than having the BIOS issue

a series of commands to effect a transfer to or from the disk drive, PIO

allows the BIOS to tell the controller what it wants and then let the

controller and the CPU perform the task by themselves.
Your system supports five modes, numbered from 0 through 4, which

differ primarily in timing. When "Auto" is selected, the BIOS will choose

the best available mode.
The options are: Auto, (Default), Disabled.

Primary/Secondary Master/Slave Ultra DMA

DMA means Direct Memory Access. Ultra DMA is faster than DMA.

DMA is a method of transferring data to or from memory at a fast rate,

without involving the CPU.
When you select "Auto", the BIOS will choose the best available mode.
The options are: Auto (Default), Disabled.

IDE Burst Mode

When enabled, data transfer on IDE buses will improve.
The options are: Disabled (Default), Enabled.

IDE HDD Block Mode

This allows your hard disk controller to use the fast block mode to transfer

data to and from your hard disk drive (HDD).
The options are: Enabled (Default), Disabled.

Onboard FDD Controller

When enabled, the floppy disk drive (FDD) controller is activated.
The options are: Enabled (Default), Disabled.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание PPC-150 Series



































































































































































































Результаты поиска

Содержание PPC-150 Series

Отзывы:

Похожие инструкции для PPC-150 Series

Бренды по названию

Популярные бренды

Advantech PPC-150 Series, Руководство пользователя

Результаты поиска

Содержание PPC-150 Series

Отзывы:

Похожие инструкции для PPC-150 Series

Бренды по названию

Популярные бренды