2 POD-6552 A2 Startup Manual
Specifications
Solid State Disk
Supports CompactFlash Card type I/II
VGA/LCD Interface
Chipset:
Intel 852GM chip integrated
Frame buffer:
Supports 64MB frame buffer with system
memory
Interface:
4X AGP VGA/LCD interface, Support for 9, 12,
15, 18bit TTL TFT(Optional for 16- or 24-bit DSTN panel)
Display mode:
CRT Mode: 1024 x 768@16bpp (85Hz);
LCD Modes:
1280 x 1024@16bpp (60Hz), 1024 x
768@16bpp (60Hz)
LVDS:
Supports 1 Channel 18bit LVDS interface(Optional
for 2 Channel 2 x 18bit LVDS)
Dual Independent Display:
CRT+LVDS, CRT+TV-Out,
LVDS+TV-Out
Ethernet interface
Chipset:
Realtek RTL8139D
Ethernet interface:
IEEE 802.3u 100BASE-T Fast
Ethernet compatible
I/O address switchless setting
Built-in boot ROM
TV-Out
Chipset:
Chrontel CH7009
Supports TV output
Supports NTSC and PAL formats
Support s-video
TV output supports graphics resolutions up to 1024 x 768
pixels
Audio Function
Chipset:
Realtek ALC202
Audio controller:
AC97 3D surround sereo sound
Supports Speaker out, CD-input, Line-in, Line-out,
Microphone
Mechanical and Enviromental
Dimensions:
(L x W) 203 x 146 mm (8” x 5.75”)
Power supply voltage:
+5 V, ±12V ±5%
Power requirements:
- Max: (WinXP, HCT11.2)
3.22 A @ +5 V (W/Celeron M 600 MHz, 512 MB
DDR333)
0.35 A @ +12 V (W/Celeron M 600 MHz, 512 MB
DDR333)
-
Typical:
(WinXP)
2.24 A @ +5 V (W/Celeron M 600MHz, 512 MB
DDR333)
0.27 A @ +12 V ((W/Celeron M 600 MHz, 512 MB
DDR333)
Operating temperature:
0 ~ 60° C (32~140° F)
Operating Humidity:
0% ~ 90% Relative Humidity, non-
condensing
Weight:
0.85 kg (weight of total package)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Jumpers
Label
Function
J1, J2, J3, J4
Setting COM2 RS232/422/485
J5
LCD voltage setting
J6
SM BUS Connector
J7
PCI VIO setting
J8
CMOS setting
J9
AT/ATX power selection
Connectors
Label
Function
CN1
VGA D-SUB connector
CN2
COM port 1,2
CN3
TV-Out connector
CN4
USB port 0,1
CN5
PS/2 Mouse/keyboard connector
CN6
LAN connector
CN7
VGA connector
CN8
Audio connector
CN9
COM port 3,4
CN10
IrDA connector
CN11
USB port 4,5
CN12
USB port 2,3
CN13
PS/2 connector
CN14
LVDS connector
CN15
LCD Backlight connector
CN16
CD-IN connector
CN17
TTL LCD connector or DSTN connector
CN18
PC104 connector
CN19
ISA connector
CN20
EBX POWER connector
CN21
-5 V & -12 V connector
CN22
CF connector
CN23
ATX connector
CN24
Secondary IDE connector
Jumpers and Connectors
