Advantech POC-W243L Series, Руководство пользователя

Страница: 19 / 30

11 POC-W243L Series User Manual
Chapter 2
S
ystem
Setup
2.2.2 Connecting the Ground pin
1. To get the system ready, find the Equipotential Terminal on rear side of POC. An
Equipotential Terminal is provided to optionally connect to a hospital ground/
earth system.
Figure 2.5 POC-W243L Series Equipotential Terminal Pin
2. Prepare the grounding cable and the other terminal link to hospital’s ground/
earth system.
Figure 2.6 Grounding cable with connector
3. Grounding cable plug with POC-W243L series Equipotential Terminal (See Fig-
ure 2.5)
2.3 Running the BIOS Setup Program
Your POC-W243L series was probably set up and configured by your dealer prior to
delivery. You may still find it necessary to use the BIOS (Basic Input-Output System)
setup program to change system configuration information, such as the current date
and time or your type of hard drive. The setup program is stored in read-only mem-
ory. It can be accessed either when you turn on or reset the panel PC, by pressing
the "F2 or Del" key on your keyboard immediately after powering on the computer.
The settings you specify with the setup program are recorded in a special area of
memory called CMOS RAM. This memory is backed up by a battery so that it will not
be erased when you turn off or reset the system. Whenever you turn on the power,
the system reads the settings stored in CMOS RAM and compares them to the
equipment check conducted during the power on self-test (POST). If an error occurs,
an error message will be displayed on screen, and you will be prompted to run the
setup program.