Advantech PCM-9590 Скачать руководство пользователя страница 35

Страница: 35 / 80

PCM-9590 User Manual

Chapter 3 BIOS Operation

Drive A / Drive B

The Item identifies the types of floppy disk drive A or drive B.

Halt on

The item determines whether the computer will stop if an error is detected during

power up.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) mem-

ory installed in the system.

Extended Memory

The POST of the BIOS will determine the amount of extended memory (above

1MB in CPU’s memory address map) installed in the system.

Total Memory

This item displays the total system memory size.

None

No floppy drive installed

360K, 5.25"

5.25 inch PC-type standard drive; 360K byte capacity

1.2M, 5.25"

5.25 inch AT-type high-density drive; 1.2M byte capacity

720K, 3.5"

3.5 inch double-sided drive; 720K byte capacity

1.44M, 3.5"

3.5 inch double-sided drive; 1.44M byte capacity

2.88M, 3.5"

3.5 inch double-sided drive; 2.88M byte capacity

No Errors

The system boot will not stop for any error.

All Errors

Whenever the BIOS detects a non-fatal error the system will be stopped.

All, But Keyboard

The system boot will not stop for a keyboard error; it will stop for all other
errors. (Default value)

All, But Diskette

The system boot will not stop for a disk error; it will stop for all other
errors.

All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for

al other errors.

Содержание PCM-9590

















































































Результаты поиска

Содержание PCM-9590

Отзывы:

Бренды по названию

Популярные бренды

Advantech PCM-9590, Руководство пользователя

Результаты поиска

Содержание PCM-9590

Отзывы:

Бренды по названию

Популярные бренды