manualshive.com logo in svg

Advantech PCM-9574, Руководство пользователя

Поделиться
Скачать
Advantech PCM-9574 Скачать руководство пользователя страница 74

62

PCM-9574  User's Manual

6.1

Introduction

The PCM-9574 on-board audio interface provides high-quality stereo
sound and FM music synthesis (ESFM) by using the ES1989 audio
controller from Creative Technology Ltd. The audio interface can
record, compress, and play back voice, sound, and music with a built-
in mixer control. The PCM-9574's on-board audio interface also
supports the Plug and Play (PnP) standard and provides PnP configu-
ration for audio, FM, and MPU-104 logical devices. It is compatible
with AC97 version 2.0, voice, and music functions. The ESFM
synthesizer is register compatible with the OPL3 and has extended
capabilities.

6.2

Installation of audio driver

Before installing the audio driver, please take note of the procedures
detailed below. You must know which operating system you are using
in your PCM-9574, and then refer to the corresponding installation
flow chart. Just follow the steps in the flow chart. You can quickly
and successfully complete the installation, even though you are not
familiar with instructions for Windows.

Note:

The CD-ROM drive is designated as "D" throughout

this chapter.

Содержание PCM-9574





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды