Advantech PCM-3353, Руководство пользователя

Страница: 25 / 92

15 Chapter 2
For PCM-3353 series, CN4 consists of a 40-pin connector which can sup-
port up to 24-bit LCD panel. It is Hirose’s product no. DF13A-40DP-1.25
V
2.13.3 LVDS TFT LCD connector (CN42)
Four PCM-3353 series, the board supports 1 channel 18-bit LVDS LCD
panel displays.
2.14 Ethernet configuration
The board is equipped with one high performance 32-bit PCI-bus Ether-
net interface which are fully compliant with IEEE 802.3U 10/100Mbps
standards. They are supported by all major network operating systems.
2.14.1 100Base-T connector (CN26)
100Base-T connections are made via one internal 10-pin box header.
2.15 Watchdog timer configuration
An onboard watchdog timer reduces the chance of disruptions which
EMP (electro-magnetic pulse) interference can cause. This is an invalu-
able protective device for standalone or unmanned applications. Setup
involves one jumper and running the control software (refer to Appendix
A).
2.16 USB connectors (CN15,CN17)
The board provides up to four USB (Universal Serial Bus) ports using
Plug and Play. The USB interfaces comply with High Speed USB specifi-
cation Rev. 2.0 which supports 480 Mbps transfer rate, and are fuse pro-
tected.
The USB interface is accessed through two 5 x 2-pin flat-cable connec-
tors. You will need an adapter cable if you use a standard USB connector.
The adapter cable has a 5 x 2-pin connector on one end and a USB con-
nector on the other.
The USB interfaces can be disabled in the system BIOS setup.