manualshive.com logo in svg

Advantech PCM-3345, Руководство пользователя

Поделиться
Скачать
Advantech PCM-3345 Скачать руководство пользователя страница 28

Chapter 2  Installation

2 1

2.16 Watchdog timer configuration

An on-board watchdog timer reduces the chance of disruptions which
EMP (electro-magnetic pulse) interference can cause. This is an
invaluable protective device for standalone or unmanned applications.
Please note that the PCM-3345's watchdog timer is always set on a
1.60 sec. interval.

2.17 ATX power (5VSB, PSON) input (CN4)

Please use the ATX cable (provided with your kit) to connect CN4 to
an ATX power supply. This cable has an ATX power connector. The
plug from the power supply can only insert one way, because of the
different hole sizes. Make sure the pins are aligned, find the proper
orientation, and push down firmly.

Important: Make sure that your ATX power supply can at least

provide at least 10mA on the 5 volt standby lead
(+5VSB). You may experience difficulty in powering
on your system if your power supply cannot support
the load.

Содержание PCM-3345










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды