Advantech PCI-7020, Руководство пользователя

Страница: 45 / 90

35 PCI-7020 User Manual
Chapter 3
A
ward
BIOS
Setup
! Video Off Method
Use this to select the method to turn off the video. The choices are “Blank
Screen”, “V/H SYNC+ Blank”, and “DPMS”.
! Video Off In Suspend
When the system is in suspend mode, the video will turn off. The choices are
“No” and “Yes”.
! Suspend Type
The choices are “Stop Grant” and “PwrOn Suspend”.
! Modem Use IRQ
This determines the IRQ that the MODEM can use.The choices are “3”, “4”, “5”,
“7”, “9”, “10”, “11”, and “NA”.
! Suspend Mode
Please refer to Table 3.1.
! HDD Power Down
Please refer to Table 3.1.
! Soft-Off by PWR-BTTN
If you choose “Instant-Off”, then pushing the ATX soft power switch button once
will switch the system to “system off” power mode. You can choose “Delay 4
sec”. If you do, then pushing the button for more than 4 seconds will turn off the
system, whereas pushing the button momentarily (for less than 4 seconds) will
switch the system to “suspend” mode.
! CPU THRM-Throttling
The ability is control how much percent of your CPU's clock speed will be throt-
tled down when the CPU overheats. You can set "75.0%", "50.0%", and
"25.0%".
! PowerOn by LAN
This item allows you to power on the system by LAN. The choices are “Enabled”
and “Disabled”.
! PowerOn by Modem
To enabled or disable the function to power on the system via a Modem connec-
tion from a remote host. The choice “Enabled” and “Disabled”.
! PowerOn by Alarm
The choices are “Enabled” and “Disabled”. Fields that follow below indicate date
of current month and time of alarm settings, if enabled.
! Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1)
or Secondary IDE 0 (1) becomes active. The choices are “Enabled” and “Dis-
abled”.
Table 3.1: Power Saving
Saving Mode Function
Min Saving
Minimum power management., Suspend Mode = 1 hr., and HDD
Power Down = 15 min.
Max Saving
Maximum power management., Suspend Mode = 1 min., and HDD
Power Down = 1 min.
User Defined
(Default)
Allows you to set each mode individually. When not disabled, each of
the ranges are from 1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min., and disabled.