Advantech PCI-1752, Быстрый старт

Страница: 17 / 62

– 10 –
Chapter 2
PCI-1752/54/56 User’s Manual
Advantech Co., Ltd.
www.advantech.com
Step 3: Remove the slot cover on the back panel of your computer.
Step 4 : Touch the metal part on the surface of your computer to
neutralize the static electricity that might be on your body.
Step 5 : Adjust DIP switch SW1 on board to set the card’s board ID.
Step 6 : Insert the PCI-1752/54/56 card into a PCI slot. Hold the card
only by its edges and carefully align it with the slot. Insert the
card firmly into place. Use of excessive force must be avoided,
otherwise the card might be damaged.
Step 7 : Fasten the bracket of the PCI card on the back panel rail of the
computer with screws.
Step 8 : Connect appropriate accessories (100-pin cable, wiring
terminals, etc. if necessary) to the PCI card.
Step 9 : Replace the cover of your computer chassis. Re-connect the
cables you removed in step 2.
Step10 : Plug in the power cord and turn on the computer .
Note:
✎
In case you installed the card without installing the DLL driver first,
Windows 95/98 will recognize your card as an “unknown device” after
reboot, and will prompt you to provide necessary driver. You should
ignore the prompting messages (just click the
Cancel button) and set
up the driver according to the steps described in Section 2.2 Driver
Installation .
After the PCI-1752/1754/1756 card is installed, you can verify whether
it is properly installed on your system in the
Device Manager :
1. Access the Device Manager through Control Panel/System/Device
Manager .
2. The device name of the PCI-1752/1754/1756 should be listed on the
Device Manager tab on the System Property Page.