2 PCI-1723 Startup Manual
PCI-1723 is equipped with a built-in DIP switch (SW1) for
defining the board ID of each module. When multiple cards
are installed on the same chassis, the board ID switch can
be used to identify the device number of each card.
Keep Last Status Jumper
An on-board jumper is used to configure the status of all
output signals after system hot-reset. User can choose to
reset all output signals to the default values after system
hot-reset, or keep them as the status before hot-reset.
The configuration of the keep last status jumper is shown in
below Table:
JP9
Description
(1:2)
Keep last status after hot reset
(2:3)
Not keep last status after hot reset
Software Installation
PCI-1723 is a high-density multiple channel analog PCI
card. The product’s user manual, drivers, and programming
SDK are available on the Advantech website, and can be
accessed using the link below. Simply search the product
name “PCI-1723”.
http://support.advantech.com.tw
Hardware Installation
After the device driver is installed, you can now install the
PCI-1723 card in your computer.
Please follow the steps below to install the PCI-1723 card.
1. Touch any metal part of your computer to neutralize the
static electricity that may be in your body.
2. Plug the card into a PCI slot. Do not use excessive
force to avoid damaging the card.
Pin Assignments
Board ID Switch
Installation (Cont,)
