2 PCE-7132/5132/5032 Startup Manual
Mechanical and Enviromental
•
Dimensions:
(L x W): 338 x 122 mm
•
Power supply voltage:
+12 V, +5 V, +3.3 V, +5 VSB
•
Power requirements(Idle):
CPU: Processor: Intel
®
W-1290E
Memory: 2 DDR4 26666U 32GB
Voltage: +3.3 V, +5 V, +12 V
Current: 1.15 A, 1.54 A, 1.38 A
Operating temperature: 0 ~ 60° C (depending on CPU)
•
Weight:
0.5 kg (weight of board)
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Connectors
Label
Function
USB3C1
USB3 port1
USB3C2
USB3 port2
USB2C1
USB2 port1
LAN1
Intel i219LM(PCE-7132/5132);
Intel i219V(PCE-5032)
LAN2
Intel i210-AT(PCE-7132/5132);
Intel i211-AT(PCE-5032)
VGA1
VGA connector
KBMS1
External PS/2 keyboard and mouse
HDAUD1
Advantech HD audio module expansion
pin-header
LPC1
LPC module expansion pin-header
Sysfan1
4 PIN fan power connector for support-
ing PWM or DC fan
LANLED1
LANLED
USB2A1
USB2 port2
USB3H1
USB3 port 3,4
USB3H2
USB3 port 5,6(PCE-7132/5132)
USB3H3
USB3 port 7,8(PCE-7132/5132)
COM1
RS-232 (9-pin Box Header) COM2 RS-
232 (9-pin Box Header) LPT1 Parallel
port
SATA0
Port 0
SATA
SATA port 1, 2, 3, 4, 5(PCE-7132/5132);
SATA port 1, 2, 3(PCE-5032)
Jumpers and Connectors
Jumpers
Label
Function
JCMOS1
CMOS clear
JME1
Clear ME data
JWDT1
Watchdog timer output selection
JOBS1
SIO Monitor Alarm
JCMOS1/JME1: Clear CMOS/ME data
Closed Pins
Result
1-2
Keep CMOS/ME data (Default)
2-3
Clear CMOS/ME data
Closed Open
H/W monitor alarm (JOBS1)
Function
Jumper Setting
Closed
Enable OBS alarm (Default)
Open
Disable OBS alarm
JWDT1: Watchdog timer output option
Closed Pins
Result
1-2
Reserved
2-3
System reset (Default)
The drivers for the PCE-7132/5132/5032 are located on the
Advatech official websites. Please visit the official website
for downloading.
https://support.advantech.com/support/new_default.aspx
Caution!
The computer is supplied with a battery-powered
real-time clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
1
2
3
1
2
3
Specifications
Jumpers and Connectors (Cont.)
Software Installation
