2 PCE-5133/5033 Startup Manual
Mechanical and Enviromental
•
Dimensions:
(L x W): 338 x 122 mm
•
Power supply voltage:
+12 V, +5 V, +3.3 V, +5 V
SB
•
Power requirements(Idle):
Voltage
+ 3.3V
+5V
+12V
Current
8.34A
4.13A
6.86A
Note: Testing conditions:
CPU:
Processor: Intel
®
i9-12900E
Memory
: 2 DDR5 4800 32GB
Operating temperature
: 0 ~ 60° C (depending on
CPU)
•
Weight:
0.5 kg (weight of board)
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Connectors
Label
Function
COM1
RS-232 (9-pin Box Header)
COM2
RS-232 (9-pin Box Header)
CPU FAN1
4-pin fan power connector for supporting
PWM or DC CPU fan
DP1 & DP2
Display port/DVI/ HDMI via optional
cables
eSPI
eSPI expansion pin header for COM
module
HDAUD1
Advantech HD audio module expansion
pin-header
JFP1
Power switch/reset connector
JFP2
External speaker/HDD LED connector/
SMBus connector
JFP3
Power LED
Suspend: fast flash (ATX/AT)
System on: on (ATX/AT)
System off: off (ATX/AT)
JPCICLK
PCI clock selection
LAN1
Intel i225LM (PCE-5133)
Intel i226V (PCE-5033)
LAN2
Intel i225LM (PCE-5133)
Intel i226V (PCE-5033)
LANLED1
LAN LED
NVMe M.2
M.2 key 2280 with PCIe Gen. 4
SATA0 &1
Port 0 & 1 (PCE-5133)
SATA4~7
SATA port 4, 5, 6, 7 (PCE-5133/5033)
SPI_TPM1
SPI expansion pin header for TPM
module
Sysfan1
4 PIN fan power connector for support-
ing PWM or DC fan
USB2A1
USB2 port 2
USB2C1
USB2 port1
USB3C1
USB3 port1
USB3C2
USB3 port2
USB3H1
USB3 port 3,4
USB3H2
USB3 port 7, 8 (PCE-5133)
USB3H3
USB3 port 5, 6 (PCE-5133)
VGA1
VGA connector
Jumpers
Label
Function
JCMOS1
CMOS clear
JME1
Clear ME data
JPCICLK1
PCI clock selection
JWDT1+
JOBS1
Watchdog timer output and OBS alarm
JPCICLK: PCI clock selection
Closed Pins
Result
1-2
66 MHZ
2-3
*33 MHZ
*Default
66 MHZ 33 MHZ
JESPI2: eSPI-interface COM module setting
Closed Pins
Result
JFV1
VGA dummy load setting
JUSB1/
JUSB2
USB power source switch
VGA dummy load setting USB power source switch
JCMOS1/JME1: Clear CMOS/ME data
Closed Pins
Result
1-2
Keep CMOS/Enable ME data (Default)
2-3
Clear CMOS/Disable ME data
1
2
3
1
2
3
1
2
3
1
2
3
Specifications (Cont.)
Jumpers and Connectors (Cont.)
Jumpers and Connectors
