Advantech PCE-5026 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 98

background image

PCE-5026 User Manual

56

4.1

Before You Begin

To facilitate the installation of the enhanced display drivers and utility software, read
the instructions in this chapter carefully. The drivers for the PCE-5026 are located on
the software installation CD. The driver in the folder of the driver CD will guide and
link you to the utilities and drivers under a Windows system. Updates are provided
via Service Packs from Microsoft®.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.

4.2

Introduction

The Intel® Chipset Software Installation (CSI) utility installs the Windows INF files
that outline to the operating system how the chipset components will be configured.
This is needed for the proper functioning of the following features:



Core PCI PnP services



Serial ATA interface support



USB 1.1/2.0 support



Identification of Intel® chipset components in the Device Manager



Integrates superior video features. These include filtered sealing of 720 pixel
DVD content, and MPEG-2 motion compensation for software DVD

Note!

The files on the software installation CD are compressed. Do not
attempt to install the drivers by copying the files manually. You must use
the supplied SETUP program to install the drivers.

«
...
64
65
66
67
68
...
»

Содержание PCE-5026



































































































Отзывы:

Нет отзывов

Похожие инструкции для PCE-5026

Бренд: Gigabyte Страницы: 40

Бренд: Zotac Страницы: 54

Бренд: Xilinx Страницы: 88

Бренд: Biostar Страницы: 37

Бренд: Gigabyte Страницы: 44

Бренд: AOpen Страницы: 11

Бренд: IDT Страницы: 18

Бренд: Supero Страницы: 143

CT-PBT01 Series

Бренд: C&T Solution Страницы: 48

DS320PR412-421EVM

Бренд: Texas Instruments Страницы: 31

Бренд: Yamaha Страницы: 98

Бренд: Yamaha Страницы: 105

Бренд: GigaDevice Semiconductor Страницы: 16

Бренд: TYAN Страницы: 35

Бренд: TYAN Страницы: 58

Бренд: Abit Страницы: 134

Бренд: ASROCK Страницы: 234

Бренд: SOYO Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды