manualshive.com logo in svg

Advantech PCA-6180 Series, Руководство пользователя

Поделиться
Скачать
Advantech PCA-6180 Series Скачать руководство пользователя страница 43

30

PCA-6180 User's Manual

2.14 Front Panel Connectors (CN16, CN17,

CN18, CN19, CN21 and CN22)

There are several external switches to monitor and control the
PCA-6180.

2.14.1 Keyboard lock and power LED (CN16)

CN16 is a 5-pin connector for the keyboard lock and power on LED.
Refer to Appendix B

 

for detailed information on the pin assignments.

If a PS/2 or ATX power supply is used, the system's power LED
status will be as indicated below:

Table 2-2: PS/2 or ATX power supply LED status

Power mode

LED (PS/2 power)

LED (ATX power)

System On

On

On

System Suspend

Fast flashes

Fast flashes

System Off

Off

Slow flashes

2.14.2 External speaker (CN17)

CN17 is a 4-pin connector for an extenal speaker. If there is no
external speaker, the PCA-6180 provides an onboard buzzer as an
alternative. To enable the buzzer, set pins 3-4 as closed.

2.14.3 Reset (CN18)

Many computer cases offer the convenience of a reset button.
Connect the wire from the reset button to CN18.

Содержание PCA-6180 Series















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды