manualshive.com logo in svg

Advantech PCA-6151, Руководство пользователя, Страница: 35 / 46

Поделиться
Скачать
Advantech PCA-6151 Скачать руководство пользователя страница 35

Chapter 3  Award BIOS Setup    27

Security Option

This setting determines whether the system will boot if the
password is denied, while limiting access to Setup.

System

The system will not boot, and access to Setup will be
denied if the correct password is not entered at the
prompt.

Setup

The system will boot, but access to Setup will be
denied if the correct password is not entered at the
prompt.

Note:

To disable security, select PASSWORD
SETTING in the main menu. At this point, you will
be asked to enter a password. Simply hit the
<ENTER> key to disable security. When security
is disabled, the system will boot, and you can
enter Setup freely. OS select for DRAM>64 MB.
This setting is underOS/2 system.

Video BIOS Shadow

This determines whether video BIOS will be copied to RAM,
which is optional according to the chipset design. When enabled,
Video Shadow increases the video speed.

C8000 - CFFFF Shadow/DC000-DFFFF Shadow

These determine whether optional ROM will be copied to RAM in
blocks of 16 KB.

Enabled

Optional shadow is enabled

Disabled Optional shadow is disabled

Содержание PCA-6151















































Отзывы:

Нет отзывов