Advantech MIT-W102 Series, Руководство пользователя, Страница: 5 / 73

5
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages
Details of preparatory treatment or disposal
Installation is only to be carried out by manufacturer authorized and trained personnel.
Regarding calibrating the device, we suggest to send back the tablet to the supplier for
annually check.
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this user manual for later reference.
3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or
letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Do not leave this equipment in an environment unconditioned where the
storage temperature under -20

C or above 60

C, it may damage the
equipment.
9. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
10. Place the power cord such a way that people cannot step on it. Do not place
anything over the power cord. The voltage and current rating of the cord
should be greater than the voltage and current rating marked on the product.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for long time, disconnect it from the power
source to avoid being damaged by transient over-voltage.
13. Never pour any liquid into ventilation openings. This could cause fire or
electrical shock.
14. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
15. If any of the following situations arises, get the equipment checked by service
personnel:
a.
The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.