Advantech MIC-3399 Скачать руководство пользователя страница 43

Страница: 43 / 100

MIC-3399 User Manual

pte

r 2
AM

I B

S S

etu

2.3.3.4

PEG Port Configuration

Figure 2.15 PEG Port Configuration



Enable Root Port

This item allows users to enable/disable the root port.



Max Link Speed

This item allows users to configure PEG 0:1:0 /0:1:1/0:1:2 max. speed.



PEG0/1/2 Slot Power Limit Value

This item allows users to set the upper limit of power supplied by the slot. Power

limit (Watts) is calculated by multiplying this value by the slot power limit scale.

Values 0 - 255.



PEG0/1/2 Slot Power Limit Scale

This item allows users to select the scale used for the slot power limit value.



PEG0 Physical Slot Number

This item allows users to set the physical slot number attached to this port. The

number must be globally unique within the chassis. Values 0 - 8191.

NOTE: When the mode is switched to 2x8 PCI Express, the two PCI Express

slots correspond to PEG0 and PEG1. When switched to 1 x8 and 2 x4 PCI

Express, the three PCI Express slots correspond to PEG0, PEG1, and PEG2.

Содержание MIC-3399





































































































Результаты поиска

Содержание MIC-3399

Отзывы:

Advantech MIC-3399, Руководство пользователя, Страница: 43 / 100

Результаты поиска

Содержание MIC-3399

Отзывы: