Advantech MIC-3389, Руководство пользователя

Страница: 28 / 84

2 0 MIC-3389 User's Manual
2.6 Ethernet Configuration (CN11 and
CN12)
The MIC-3389 is equipped with dual high performance 32-bit PCI-
bus Fast Ethernet interfaces which are fully compliant with IEEE
802.3u 10/100Base-TX specifications. It is supported by all major
network operating systems and is 100% Novell NE-2000 compatible.
Two on-board RJ-45 jacks provide convenient connection to the
network.
The medium type can be configured via the software program
included on the utility CD-ROM disc. (See Chapter 3 for detailed
information.)
2.7 Card Installation
The CompactPCI
TM
connectors are firm and rigid, and require careful
handling while plugging and unplugging. Improper installation of a
card can easily damage the backplane of the chassis.
The inject/eject handles of MIC-3389 help you install and remove
the card easily and safely. Follow the procedure below to install the
MIC-3389 into a chassis:
To install a card:
1. Hold the card vertically. Be sure that the card is pointing in the
correct direction. The components of the card should be pointing
to the right-hand side.
2. Pull out both handles to unlock it.
Caution: Keep your fingers away from the hinge to prevent your
fingers from getting pinched.
3. Insert the card into the chassis by sliding the upper and lower
edges of the card into the card guides.
4. Push the card into the slot gently by sliding the card along the card
guide until the handles meet the rectangular holes of the cross
rails.