Advantech MIC-3037 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 37

Advantech MIC-3037 Скачать руководство пользователя страница 28

Chapter 3 Blackplane 19

3.5.1 Alarm Board Interface (CN3)

The 30-pin connector CN3 is an interface for an optional external
monitoring and alarm module which monitors the conditions of the
system. This alarm module will be available in August 2001. For more
information about it , please contact with our local sales representives
or visit our website.

3.5.2 Fan Module Connector (FAN1~4)

The FAN connectors FAN 1~4 p12 V power for fan operation
and accepts the tachometer output from the fans.

3.5.3 Power Switch (JP1)

This connector provides power on/off control of the ATX power
supply or the plug-in power module. If the CompactPCI

TM

chassis

provides a 2-pin power switch cord, connect this cord to the JP1
connector and users can control the power on/off by the power
switch. Or users can directly short this connector by a jumper and
control the power on/off by the ATX power supply switch.

3.5.4 Screw terminal for external power supply

Along the upper and lower edges of the backplane are 4 power pads
providing external power supply I/O. These 4 pads facilitate input or
output of powers and grounds. Contact Advantech for installation
help.

«
...
26
27
28
29
30
...
»

Содержание MIC-3037






































Отзывы:

Нет отзывов