Advantech MARS-1030, Руководство пользователя

Страница: 9 / 212

3 Chapter 1
1.2 User and Product Safety
• Do not stare into the laser beam directly or shine it into eyes.
• Never use strong pressure onto the screen or subject it to severe
impact, as the LCD panel could become cracked and possibility
cause personal injury. If the LCD panel is broken, never touch the
liquid inside, for such contact would irritate the skin.
• Although the MARS-1030 PDT has been passed the test of IP54
standard for water and dust resistance, avoid prolonged exposure to
rain or other concentrated moisture. For these conditions exceed the
IP54 standard, and could result in water or other contaminants enter-
ing into the PDT.
• Use only the approved AC Adapter with the PDT. Use of an unap-
proved AC Adapter could result in electrical problems, or even cause
a fire or electrical shock to the user.
• Be sure that only authorized supplier are allowed to disassemble and
reassemble the device. If the device or parts has been damaged due
to any wrong handling, shall void the product and parts warranty.
• Always make back-up copies of all important data. Easy done by
using a cable or Single Cradle (sold by optional) to transfer data to
the computer. Manufacturer is not liable for any data damages or
data loss caused by deletion or corruption by using of this device, or
due to the drained battery.
• Lithium-ion battery packs might get hot, explode, ignite and/or cause
serious injury if exploded by abusive using. Please follow the safety
warnings listed as below:
– Do not place the battery pack in fire or heat the battery.
– Do not install the battery pack backwards so the polarity is reserved.
–
Do not connect the positive Battery pack with negative
battery pack to each other with any metal object (like
wire).
– Do not carry or store battery pack together with metal objects.
– Do not pierce the battery pack with nails, strike the battery pack
with a hammer, step on the battery pack or otherwise put it to
strong impacts or shocks.
– Do not solder directly onto the battery pack.