Advantech ITA-460 Series Скачать руководство пользователя страница 72

Страница: 72 / 82

ITA-460 User Manual

5.1

Before you begin

To facilitate the installation of the enhanced display drivers and utility software, read

the instructions in this chapter carefully. The drivers for the ITA-460 are located on

Advantech Website.

Before you begin, it is important to note that most display drivers need to have the

relevant software application already installed in the system prior to installing the

enhanced display drivers. In addition, many of the installation procedures assume

that you are familiar with both the relevant software applications and operating sys

tem commands. Review the relevant operating system commands and the pertinent

sections of your application software’s user manual before performing the installa

tion.

5.2

Introduction

The Intel® Chipset Software Installation (CSI) utility installs the Windows INF files

that outline to the operating system how the chipset components will be configured.
This is needed for the proper functioning of the following features:



Core PCI PnP services



Serial ATA interface support



Identification of Intel chipset components in the Device Manager.

5.3

Windows Driver Setup

Enter the Advantech support website, then search product ITA-460. You can see

“ITA-460" driver inside.

Note!

For system stability, installing the drivers in the following sequence is

highly recommended:



Chipset



Graphics



Other drivers

Note!

The chipset driver is used for the following versions of Windows, and it

has to be installed before installing all the other drivers:



Windows 10 (64bit)

Содержание ITA-460 Series



















































































Результаты поиска

Содержание ITA-460 Series

Отзывы:

Похожие инструкции для ITA-460 Series

Бренды по названию

Популярные бренды

Advantech ITA-460 Series, Руководство пользователя

Результаты поиска

Содержание ITA-460 Series

Отзывы:

Похожие инструкции для ITA-460 Series

Бренды по названию

Популярные бренды