Advantech ISV-1320-ISC, Руководство пользователя

Страница: 127 / 250

A d v a n t e c h I S V - 1 3 2 0 - I S C A d v a n t e c h I S V - 1 3 2 0 - I S C A d v a n t e c h I S V - 1 3 2 0 - I S C A d v a n t e c h I S V - 1 3 2 0 - I S C A d v a n t e c h I S V - 1 3 2 0 - I S C 6 - 4 1 6 - 4 1 6 - 4 1 6 - 4 1 6 - 4 1
6 . 3 . 6 . 2 6 . 3 . 6 . 2 6 . 3 . 6 . 2 6 . 3 . 6 . 2 6 . 3 . 6 . 2 UnixWare/OpenUnix 8 UnixWare/OpenUnix 8 UnixWare/OpenUnix 8 UnixWare/OpenUnix 8 UnixWare/OpenUnix 8
O v e r v i e w O v e r v i e w
O v e r v i e w O v e r v i e w O v e r v i e w
Follow these instructions when installing the Broadcom
® Gigabit LAN controller
drivers on a UnixWare/OpenUnix 8 system.
The network adapter driver is released as an installable package in
datastream format.
1. Use the following command to install the bcme package on the Unixware
system:
pkgadd -d <install-path>
Where <install-path> is the full path name of the installable package
b c m e - < v e r s i o n > . p k g
b c m e - < v e r s i o n > . p k g
b c m e - < v e r s i o n > . p k g b c m e - < v e r s i o n > . p k g b c m e - < v e r s i o n > . p k g.
2. After installing the package, use n e t c f g n e t c f g n e t c f g n e t c f g n e t c f g or s c o a d m i n n e t w o r k s c o a d m i n n e t w o r k s c o a d m i n n e t w o r k s c o a d m i n n e t w o r k s c o a d m i n n e t w o r k to
add the network adapter.
3. When prompted, select the Line Speed Line Speed
Line Speed Line Speed
Line Speed, then select Advanced Option Advanced Option
Advanced Option Advanced Option
Advanced Option
for Flow Control, MAC Address, and Jumbo MTU Size settings. Change
these settings, if desired.
Listed on the next page are the settings for these properties.
F l o w C o n t r o l F l o w C o n t r o l F l o w C o n t r o l F l o w C o n t r o l F l o w C o n t r o l
• Off
• AutoNegotiate (Symmetric Pause advertised)*
• RxPause
• TxPause
• RxPause/TxPause
• Auto-negotiation of Flow Control is only valid when the Line Speed
is set to AutoNegotiate (all speeds advertised or single speed
advertised).
* Default setting. When selected or configured, a kernel relink
and restart is required before the new configuration takes
effect.