Advantech IPC-510 Series, Руководство пользователя

Страница: 23 / 36

7 IPC-510 User Manual
/ 用户手册
C
ha
pte
r 2
Sy
ste
m
S
etu
p/
系
统
安
装
/
系
統
安
裝
2.1 Removing the Top Cover
/ 移除顶盖 / 移除上蓋
Remove the chassis cover by releasing the two screws which are on rear of chassis.
以起子松开顶盖后部的两个螺丝可移除顶盖。
以起子鬆開上蓋後方的兩顆螺絲可拆除上蓋 .
2.2 Installing the Backplane or Motherboard
/ 安装底
板或母板 / 安裝背板或主機板
To install backplane or motherboard into the chassis, please find the yellow label in
the chassis and screw the cooper stubs into the correct locations.
安装底板或母板到機箱之前，请先找到机箱上的黄色标签，并将铜柱安装在正确位置。
安裝底板或主機板到機箱之前，請先找到機箱上的黃色標籤，並將銅柱安裝在正確位
置。
1. When installing the PICMG 1.0 BACKPLANE, connect the orange-white wire
from connector 'HCN1' on the backplane to connector 'CN21' on the CPU card.
2. While installing a MOTHERBOARD, attach the motherboard I/O shielding onto
the rear plate first. Then fasten the motherboard onto the chassis.
3. Connect the 20-pin (or 24-pin) ATX power connector and the 4-pin +12V power
connector from the power supply to the backplane or the motherboard. (For the
PICMG 1.0 BACKPLANE, the 4-pin +12 V power connector is connected to the
CPU card.)
4. Connect the 9-pin USB wire, PS/2 wire, power switch wire, and the system reset
switch wire from the chassis to the motherboard.
5. Connect the HDD LED wire from the chassis to the motherboard.
Table 2.1: Yellow label indicating copper stub locations
/指示铜柱位置的
黄色标签/指示銅柱位置的黃色標籤
NUT number
BP/MB model
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 A M C
PCA-6113P4R
PCA-6114P7
PCA-6114P12
* * * * * * * * * * * * * * * * *
PCA-6114P4
PCA-6114P10
PCA-6113DP4
* * * * * * * * * * * * * * * *
PCA-6114 * * * * * * * * * * * * *
PCE-5B10
PCE-5B12
PCE-5B13
PCE-5B12D
PCE-7B13
* * * * * * * * * * * * * * *
AIMB-5 series * * * * * * *
AIMB-7 series
ASMB-7 series
ASMB-805
ASMB-815
* * * * * * * * *
ASMB-816 * * * * * * * * *
Max. Torque of copper stub 10kgf.cm