Advantech INTRAC INTRAC-305, Инструкция по установке и эксплуатации

Страница: 83 / 96

INTRAC-305 INSTALLATION
© 2011
Advantech Wireless
INTRAC-305 MANUAL - Issue 3.2 Page 71
6
Test Port 1 & 2 RS423
INTRAC
TM
305 Serial Port Connector
Remote Control PC
9 way D type
Socket
Signal Type
Signal Name
Signal Type PC Connector
1 Passive DCD
2 output RXD input
3 input TXD output
4
5 GND GND GND
6 Passive DSR
7
8 Passive CTS
9 N/C N/C
Test Port 1 & 2 RS422
INTRAC
TM
305 Serial Port Connector
Remote Control PC
9 way D type
Socket
Signal Type
Signal Name
Signal Type PC Connector
1
2 output RXDB = RXD- input
3 input TXDB = TXD- output
4
5 GND
6 output RXDA = RXD+ input
7 input TXDA = TXD+ output
8
9
The INTRAC-305 is wired as a DCE unit suitable for direct 1
to 1 connection to the 9-way serial port of a PC AT.
TXD and RXD data flow directions are standard (relative to
the DTE). Handshake lines are pulled to the ON condition.
The factory default setting for the three serial ports is RS423.
The set-up for RS422 is shown over page.