19
ICAM-7000 User Manual
Chapter 3
G
etting
started
3.7.2
Digital output
There are two opto-isolated digital output for each Port, each digital output supports
inverter feature and can be configured as three different modes, including User Pro-
grammable Mode, Pass Mode and Counter Mode.
User Programmable Mode:
User can program the state of the digital output line.
Pass Mode:
The digital output signal is active when a valid digital input occurs.
Counter Mode:
In this mode, the digital input acts as the trigger source, user can set the falling or
raising edge as the trigger start signal, and the digital output acts as a pulse output,
user can set the delay time, and pulse width for the digital output, the operation and
timing chart for raising edge Counter Mode is as follows:
1.
A raising edge of the digital input occurs.
2.
When the delay expires, the digital output signal becomes high.
3.
When the duration period expires, the digital output signal becomes low.
Содержание ICAM-7000 Series
