Advantech HPC-8424, Руководство пользователя

Страница: 25 / 52

13 HPC-8424 User Manual
/ 用户手册
Chapter 2
S
ystem
Setup
系统安装 系統安裝
Figure 2.5 Installing a motherboard
/ 安装母板 / 安裝主機板
2.4 Installing Disk Drives
/ 安装磁盘驱动器 / 安裝磁碟機
HPC-8424 is equipped with 24 hot-pluggable 3.5"/2.5" HDD trays at the front, and 2
hot-pluggable 2.5” HDD trays at the rear. To install disk drives, follow the instructions
below.
HPC-8424 支持 24 个前置 3.5
"
/2.5
"
硬盘托架和 2 个后置热插拔 2.5
"
硬盘托架。请参考
以下指示安装各种硬盘。
HPC-8424 支援 24 個前置 3.5
"
/2.5
"
硬碟托架和 2 個後置熱插拔 2.5
"
硬碟托架。請參考
以下指示安裝各種硬碟。
The HPC-8424 SE/SA SKU accepts SAS 12/6G, SATA 6G HDDs, and even NVMe
(U.2) SSDs in front 24 HDD bays. The 24 HDD trays all support hot swapping.
1. Remove the HDD tray from the HDD bay.
2. Slide one SAS/SATA/NVMe disk drive into the tray and affix it in place with 4
screws.
3. Return the HDD tray to the chassis, pushing until the handle of the tray returns
to the original position. Right-shift the key latch to lock the HDD tray.
4. Repeat Steps 1 to 3 to install additional HDDs/SSDs.
HPC-8424 SE/SA 版本皆可同时支持 SAS 12/6G, SATA 6G 硬盘，以及新一代 NVMe (U.2)
的固态硬盘在前方的 24 个硬盘槽位。这 24 个硬盘托架皆支持热抽换功能。
1. 将硬盘托架从硬盘槽中取出。
2. 将 SAS/SATA/NVMe 硬盘固定于硬盘托架上并锁付四个螺丝固定。
3. 放回硬盘托架，然后握住把手将其推回原处。向右拨动 HDD 托架的门闩，将托
架锁住。
4. 如需安装多个硬盘 / 固态硬盘，请重复操作步骤 1 ~ 3。