Advantech HIT-W183, Руководство пользователя

Страница: 13 / 38

5 HIT-W183 User Manual
Chapter 1
Introduction
1.3.3 Cleaning and Disinfecting
During normal use of the HIT-w183 healthcare infotainment terminal, the device may
become dirty and should be regularly cleaned.
Steps
1. Prepare pure water for cleaning.
2. Moisten a cloth in the water and then wipe the HIT terminal.
3. Use a dry cloth to wipe the terminal again thoroughly.
1.4 Operating Principles
The terminal’s data input points are the touch panel, physical keys located at the bot-
tom of the front panel, accessories connected via USB ports, and LAN/WLAN con-
nections. The device’s processing unit receives the inputted data, execute relevant
computations, and then outputs the data to the LCD panel, accessories, or other inte-
grated devices via the I/O ports or LAN/WLAN connections. Data can be stored in the
system’s internal storage, and even when the terminal is powered off, the data is
retained in the system memory.
1.5 Intended User Profile
 Age: 18 to 65
 Weight: Not relevant
 Health: Not relevant

Nationality: Global
 Patient state: VIP room patient
 Part of the body or type of tissue applied to or interacted with: Hands and fin-
gers, expected contact time shall be less than 1 minute
 Education level: At least 8 years of intensive reading experience (school)

Knowledge:
– Minimum - Able to read and understand westernized Arabic numerals written
in Arial font
– Able to distinguish every part of the terminal as described in the user manual
 Technician: Must be trained and authorized by the manufacturer
To be considered trained and authorized, technicians must complete the training
course developed by the manufacturer (see the document HIT-W183_User
Manual_Rev 1.0 for further information). When determined to be necessary by
the manufacturer, the technician may be called back for retraining. Annual train-
ing is also necessary.
Caution!

Do not immerse or rinse the HIT terminal or peripherals. If liquid is
accidentally spilled on the device, disconnect the terminal from the
power source.
 Contact the IT support department regarding the continued safety
of the terminal before placing it back into operation. Do not spray
any cleaning agents on the chassis.
 Do not use disinfectants that contain phenol.

Do not autoclave or clean the HIT terminal or peripherals using
strong aromatic, chlorinated, ketone, ether or ether solvents, sharp
tools, or abrasives. Never immerse electrical connectors in water or
other liquids.