4 FWA-1330B Startup Manual
2. Take two textured anti-skidding screws and a SATA
cable from the accessory box. Follow the figure below
to connect the SATA cable to the bracket.
3. Take an HDD and insert it into the SATA interface as
follow.
4. Use four sunk screws in the accessory box to fix the
HDD module onto the bracket.
Installation (Cont.)
5. Take the thermal pad out of the accessory box and
stick it onto HDD.
Note:
A. Margins should be kept between the pad edge and
the bracket (see below).
B. Thermal pad should not be placed onto the HDD
motor.
Installation (Cont.)
