Advantech FPM-30CT, Руководство пользователя

Страница: 8 / 15

Chapter 1 Introduction 5
Connectors
The following connectors are situated on the left hand side of the
FPM-30. Also refer to the diagram overleaf.
Video I/O Port (DB-44)
This connector links the FPM-30 to the PCA-6653 display card. The
figure below shows how to connect the DB-44 to the PCA-6653.
Note: The Display card provides power to the FPM-30; no external
power is required.
WARNING: Make sure that your display card corresponds
with your choice of display! If you install a TFT LCD display
card and connect a Mono LCD, or vise versa, you risk
damaging your display. Do not use any VGA card other than
the PCA-6653 shipped with this panel display.
Touchscreen Connector (DB-9) (optional)
This connector will be present only if a touchscreen is installed. It
must be connected to the RS-232 port of the CPU card in your chassis.
The touchscreen cable is included with all orders which include the
touchscreen option.
External Keyboard Connector
The FPM-30 provides an external keyboard connector to let you
attach a PC/AT standard keyboard. The figure below shows the
correct wiring method. Be sure the internal keyboard connector
between PCA-6653 (EXT.KBD) and the CPU card (KBD) has been
connected.