Advantech ER75s Скачать руководство пользователя страница 36

Страница: 36 / 107

ER75s

8.5

IPsec status

Information on actual IPsec tunnel state can be called up in option

IPsec

in the menu.

After correct build the IPsec tunnel, status display

IPsec SA established

(highlighted in

red) in IPsec status information. Other information is only internal character.

Figure 20: IPsec status

8.6

DynDNS status

The result of updating DynDNS record on the server www.dyndns.org can be invoked by

pressing the

DynDNS

item in the menu.

Figure 21: DynDNS status

In detecting the status of updates DynDNS record are possible following message:

•

DynDNS client is disabled.

•

Invalid username or password.

•

Specified hostname doesn’t exist.

•

Invalid hostname format.

•

Hostname exists, but not under specified username.

•

No update performed yet.

•

DynDNS record is already up to date.

•

DynDNS record successfully update.

•

DNS error encountered.

Содержание ER75s












































































































Результаты поиска

Содержание ER75s

Отзывы:

Похожие инструкции для ER75s

Бренды по названию

Популярные бренды

Advantech ER75s, Руководство пользователя

Результаты поиска

Содержание ER75s

Отзывы:

Похожие инструкции для ER75s

Бренды по названию

Популярные бренды