Advantech EKI-9226G Series, Руководство пользователя

Страница: 118 / 169

EKI-9226G Series User Manual 105
4.9.1.5 LLDP Overloading
To access this page, click Management > LLDP > LLDP Overloading .
The ensuing table for LLDP Overloading settings are informational only: Port, Total
(Bytes), Left to Send (Bytes), Status and Status (Mandatory TLVs, 802.3 TLVs,
Optional TLVs and 802.1 TLVs).
4.9.2 SNMP
Simple Network Management Protocol (SNMP) is a protocol to facilitate the monitor -
ing and exchange of management information between network devices. Through
SNMP, the health of the network or status of a particular device can be determined.
4.9.2.1 SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or dis -
abled).
To access this page, click
Management > SNMP > SNMP Settings .
Figure 4.108 Management > SNMP > SNMP Settings
The following table describes the items in the previous figure.
The ensuing table for
SNMP Information
settings are informational only: SNMP.
4.9.2.2 SNMP Community
The SNMP Community page provides configuration options for the community.
SNMP v1 and SNMP v2c use the group name (Community Name) certification. It’s
role is similar to the password function. If SNMP v1 and SNMP v2c are used, you can
go directly from the configuration settings to this page to configure the SNMP com -
munity.
To access this page, click
Management
>
SNMP
>
SNMP Community
.
Figure 4.109 Management > SNMP > SNMP Community
The following table describes the items in the previous figure.
Item Description
State Click
Enabled
or
Disabled
to define the SNMP daemon.
Apply Click Apply to save the values and update the screen.
Item Description
Community Name Enter a community name (up to 20 characters).