Advantech EKI-9226G Series, Руководство пользователя

Страница: 112 / 169

EKI-9226G Series User Manual 99
The ensuing table for Egress Bandwidth Control Status settings are informational
only: Port and Egress Rate Limit (Kbps).
4.8.3.3 Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
To access this page, click
QoS > Rate Limit > Egress Queue .
Figure 4.100 QoS > Rate Limit > Egress Queue
The following table describes the items in the previous figure.
The ensuing table for
FE1 Egress Per Queue Status
settings are informational only:
Queue Id and Egress Rate Limit (Kbps).
State Select Disabled or Enabled to set the Egress Bandwidth Control
state.
Rate (Kbps) Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth
rate.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
Port Click the drop-down menu to select the port to define the Egress
queue.
Queue Click the drop-down menu to set the queue order for the Egress set -
ting.
State Click Disabled or Enabled to set the Egress queue state.
CIR (Kbps) Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Apply Click Apply to save the values and update the screen.