Advantech EKI-7712 Series Скачать руководство пользователя

Страница: 43 / 177

EKI-7712 Series User Manual

3.1.4

Using the Graphical (Web) Interface

The graphical interface is provided via a web server in the switch and can be

accessed via a web browser such as Chrome, Firefox, or Internet Explorer.

HTTP and HTTPS (secure HTTP) are supported for access to the web server. By

default, only HTTP is enabled. Either or both may be enabled or disabled to secure

the switch. (See the Remote Access Security topic in this section.)
To access the graphical interface, enter a URL like HTTP://192.168.1.1 in your

browser's address bar. Replace “http” with “https” to use secure http and replace

“192.168.1.1” with your switch's IP address if you've changed it from the factory

default.
The web server in the switch uses a signed security certificate. When you access the

server via https, you may see a warning dialog indicating that the certificate was

signed by an unknown authority. This is expected and to avoid this message in the

future you can choose to install the certificate on your computer.

3.1.5

Configuring the Switch for Network Access

To control and monitor the switch via the network, it must be configured with basic

network settings, including an IP address and subnet mask.
To configure the switch for network access, select [Add Menu Address Here] to reach

the System Settings menu. The settings in this menu control the switch's general net

work configuration.



DHCP Enabled/Disabled: The switch can automatically obtain an IP address

from a server using the Dynamic Host Configuration Protocol (DHCP). This can

speed up initial set up, as the network administrator does not have to find an

open IP address.



IP Address and subnet mask configuration: The IP address for the switch can

be changed to a user-defined address along with a customized subnet mask to

separate subnets.



Default Gateway Selection: A Gateway Address is chosen to be the address of

a router that connects two different networks. This can be an IP address or a

Fully Qualified Domain Name (FQDN) such as “domainname.org”.



NTP Server: The IP address or domain name of an NTP (Network Time Proto

col) server from which the switch may retrieve the current time at startup.

Please note that using a domain name requires that at least one domain name

server be configured.

Note!

JavaScript must be supported and enabled in your browser for the

graphical interface to work correctly.

Note!

This manual describes and depicts the web user interface in detail. The

terminal interface is not specifically shown but is basically the same.

Note!

Advanced users can set the IP address to 0.0.0.0 to disable the use of

an IP address for additional security. However, any features requiring an

IP address (i.e., web interface, etc.) will no longer be available.

Содержание EKI-7712 Series


















































































































































































Результаты поиска

Содержание EKI-7712 Series

Отзывы:

Похожие инструкции для EKI-7712 Series

Бренды по названию

Популярные бренды

Advantech EKI-7712 Series, Руководство пользователя

Результаты поиска

Содержание EKI-7712 Series

Отзывы:

Похожие инструкции для EKI-7712 Series

Бренды по названию

Популярные бренды