manualshive.com logo in svg

Advantech EKI-7708 Series, Руководство пользователя, Страница: 57 / 163

Поделиться
Скачать
Advantech EKI-7708 Series Скачать руководство пользователя страница 57

44

EKI-7708 Series User Manual

 

4.4.6

System Time

To access this page, click 

System

 > 

System Time

.

Figure 4.14 System > System Time

The following table describes the items in the previous figure.

Item

Description

Enable SNTP

Click the radio button to enable or disable the SNTP.

SNTP/NTP Server 
Address

Enter the address of the SNTP server. This is a text string of up to 64 
characters containing the encoded unicast IP address or hostname of 
a SNTP server. Unicast SNTP requests will be sent to this address. If 
this address is a DNS hostname, then that hostname should be 
resolved into an IP address each time a SNTP request is sent to it.

SNTP Port

Enter the port on the server to which SNTP requests are to be sent. 
Allowed range is 1 to 65535 (default: 123).

Manual Time

Click the drop-down menus to set local date and time of the system.

Time Zone

Click the drop-down menu to select a system time zone.

Daylight Saving Time Click the drop-down menu to enable or disable the daylight saving 

time settings.

Daylight Saving Time 
Offset

Enter the offsetting variable in seconds to adjust for daylight saving 
time.

Содержание EKI-7708 Series




































































































































































Отзывы:

Нет отзывов