Advantech eki-7656c Скачать руководство пользователя страница 53

Страница: 53 / 114

3.3.1 System

System Information

Here you can view the system information and assign the system name and location to make this switch
more easily to be identified on your network.

•

System Name

: Assign the name of the switch. The maximum length is 64 bytes.

•

System Description

: Displays the description of switch. Read only cannot be modified.

•

System Location

: Assign the switch physical location. The maximum length is 64 bytes.

•

System Contact

: Enter the name of contact person or organization.

•

Firmware Version

: Displays the switch’s firmware version.

•

Kernel Version

: Displays the kernel software version.

•

MAC Address

: Displays the unique hardware address assigned by manufacturer (default).

Warning

Don’t set “0” for the first segment of the subnet mask and default gateway
(000.xxx.xxx.xxx).

Refresh the web screen if the web could not be displayed while you change
the setting.

Figure 3.3-4 System Information

43 Chapter3

Содержание eki-7656c



















































































































Результаты поиска

Содержание eki-7656c

Отзывы:

Advantech eki-7656c, Руководство пользователя, Страница: 53 / 114

Результаты поиска

Содержание eki-7656c

Отзывы: