Advantech EKI-7428 Series, Руководство пользователя

Страница: 113 / 159

EKI-7428 Series User Manual 100
The ensuing table for Community Status settings are informational only: No.,
Community Name, Access Right and Delete (click to delete the desired community
name).
4.9.2.3 SNMPv3 Settings
The SNMPv3 Settings page allows you to create SNMP groups. The users have the
same level of security and access control permissions as defined by the group
settings.
To access this page, click Management > SNMP > SNMPv3 Settings .
Figure 4.106 Management > SNMP > SNMPv3 Settings
The following table describes the items in the previous figure.
The ensuing table for User Status settings are informational only: User Name,
Access Right, Auth-Protocol, Priv-Protocol and Delete (click to delete the desired
user name).
Access Right Click the radio box to specify the access level (read only or read write)
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
User Name Enter a user name (up to 32 characters) to create an SNMP profile.
Access Right Click read-only or read-write to define the access right for the profile.
Encrypted Click the option to set the encrypted option for the user setting.
Auth-Protocol Click the drop-down menu to select the authentication level: MD5 or
SHA. The field requires a user password.

MD5: specify HMAC-MD5-96 authentication level

SHA: specify HMAC-SHA authentication protocol
Password Enter the characters to define the password associated with the
authentication protocol.
Priv-Protocol Click the drop-down menu to select an authorization protocol: none or
DES.The field requires a user password.

None: no authorization protocol in use

DES: specify 56-bit encryption in use
Password Enter the characters to define the password associated with the
authorization protocol.
Add Click Add to save the values and update the screen.