Advantech EKI-7428 Series, Руководство пользователя

Страница: 112 / 159

99 EKI-7428 Series User Manual
4.9.1.5 LLDP Overloading
To access this page, click Management > LLDP > LLDP Overloading .
The ensuing table for LLDP Overloading settings are informational only: Port, Total
(Bytes), Left to Send (Bytes), Status and Status (Mandatory TLVs, 802.3 TLVs,
Optional TLVs and 802.1 TLVs).
4.9.2 SNMP
Simple Network Management Protocol (SNMP) is a protocol to facilitate the
monitoring and exchange of management information between network devices.
Through SNMP, the health of the network or status of a particular device can be
determined.
4.9.2.1 SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or
disabled).
To access this page, click Management > SNMP > SNMP Settings .
Figure 4.104 Management > SNMP > SNMP Settings
The following table describes the items in the previous figure.
The ensuing table for SNMP Information settings are informational only: SNMP.
4.9.2.2 SNMP Community
The SNMP Community page provides configuration options for the community.
SNMP v1 and SNMP v2c use the group name (Community Name) certification. It’s
role is similar to the password function. If SNMP v1 and SNMP v2c are used, you can
go directly from the configuration settings to this page to configure the SNMP
community.
To access this page, click Management > SNMP > SNMP Community .
Figure 4.105 Management > SNMP > SNMP Community
The following table describes the items in the previous figure.
Item Description
State Click Enabled or Disabled to define the SNMP daemon.
Apply Click Apply to save the values and update the screen.
Item Description
Community Name Enter a community name (up to 20 characters).