Advantech EKI-6333AC-2G Series Скачать руководство пользователя | Manualshive

Страница: 3 / 56

background image

EKI-6333AC-2G Series User Manual

iii

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant industrial
enclosure products.

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

FCC RF Radiation Exposure Statement:

1.

This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

2.

This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters (7.87 inches) between the radiator and
your body.

«
1
2
3
4
5
...
»

Содержание EKI-6333AC-2G Series

























































Отзывы:

Нет отзывов

Похожие инструкции для EKI-6333AC-2G Series

Бренд: Ruckus Wireless Страницы: 3

STEVAL-SPBT4ATV3

Бренд: ST Страницы: 9

Бренд: Link-One Страницы: 77

3CRWDR101A-75-US - OfficeConnect ADSL Wireless 54 Mbps 11g Firewall...

Бренд: 3Com Страницы: 146

150Mbps ADSL2/2+

Бренд: Kraun Страницы: 67

Бренд: Magnum Страницы: 2

IGAP-420 series

Бренд: ORiNG Страницы: 56

Бренд: ORiNG Страницы: 58

Бренд: XtendLan Страницы: 23

Internet BWA System 3200

Бренд: Nortel Страницы: 68

Technicolor DWA0120

Бренд: Home Telecom Страницы: 14

Бренд: BALUN Страницы: 68

Бренд: Fritz! Страницы: 127

Бренд: Eusso Страницы: 52

Бренд: Eusso Страницы: 56

IAP2300R-4A25-2GT-P12 48

Бренд: 3onedata Страницы: 4

Baton iB-WRB300N

Бренд: iBall Страницы: 55

Бренд: D-Link Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды