14
Connections
Special Consol Port
Connect one end of the 2M MIL-C-5015 IP67
RS-232 console port cable to this port; connect
the other end to a Serial Port on a computer
that is running a terminal emulation program;
connect the another end to a Serial Port on a
notebook or PDA that is running Alignment /
Deployment tools program for technicians to
analysis RF equipments.
Note: Use this console connection only if you
are configuring the EKI-6321AG via the console.
Data Input Port
Connect one end of the cross-over Ethernet cable to this port;
connect the other end to the Ethernet port on the computer.
Power & Data Output Port
Attach one end of the Cat-5 Ethernet cable to this port;
attach the other end to the
M12 to RJ45 Ethernet
Cable Converter
port on the Advantech EKI-6321AG.
Special Ethernet Port
Connect one end of the
M12 to RJ45
Ethernet Cable Converter and
Ethernet
Cable into this port; connect the other end
into the Power and Data Output Port on
Inline Power Injector.
Antenna Connector:
1
×
Reversed Female N-type
Connect to Antenna base by
Male to Male N-type
CFD 400 RF Cable
