Advantech DNS-3200 Скачать руководство пользователя страница 80

Страница: 80 / 110

DNS-3200 User’s Manual

5.9 Viewing Array Details from the BIOS

This option allows you to look at the details of the array. Nothing can be
changed from this menu option. It is for information only.

To view array details:

From the

Main

menu, select

View Array Details

Use the arrow keys to choose an array.

The full details of the array are displayed in both the Information field
across the top, and include the following data:

• Array Number
• Type
• Size
• State
• Name
• Cache setting
• DOS size

5.10 Rescanning All Channels from the BIOS

This option allows you to rescan all channels to detect new or removed
disks and arrays.
To perform a rescan, select

Rescan All Channels

from the

Main

menu.

The activity indicator in the

Information

field spins while the disks are

being polled.

Note:

The Disks list shows the disks in the array as
selected (green).

Содержание DNS-3200















































































































Результаты поиска

Содержание DNS-3200

Отзывы:

Похожие инструкции для DNS-3200

Бренды по названию

Популярные бренды

Advantech DNS-3200, Руководство пользователя

Результаты поиска

Содержание DNS-3200

Отзывы:

Похожие инструкции для DNS-3200

Бренды по названию

Популярные бренды